Lenovo IdeaCentre Q200 Q200 Hardware Replacement Guide - Page 27
To replace the heat sink assembly
View all Lenovo IdeaCentre Q200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
To replace the heat sink assembly: 1. Open the computer cover. Refer to "Opening the computer cover". 2. Pivot the drive bay assembly upward to gain access to the microprocessor. 3. Disconnect all cables connected to the system board. Refer to "Identifying parts on the system board". 4. Lift the system board out of the chassis carefully. Refer to the "Replacing the system board". 5. Disconnect the heat sink and fan assembly cable from the system board. Refer to "Identifying parts on the system board". 6. Remove the four screws securing the heat sink and fan assembly to the system board. 24 Hardware Replacement Guide 31032756_HaWaii-HRG_EN.indd 24 2008.1.8 3:31:37 PM
24
Hardware Replacement Guide
To replace the heat sink assembly:
1.
Open the computer cover. Refer to “Opening the computer cover”.
2.
Pivot the drive bay assembly upward to gain access to the microprocessor.
3.
Disconnect all cables connected to the system board. Refer to “Identifying
parts on the system board”.
4.
Lift the system board out of the chassis carefully. Refer to the “Replacing the
system board”.
5.
Disconnect the heat sink and fan assembly cable from the system board. Refer
to “Identifying parts on the system board”.
6. Remove the four screws
securing the heat sink and fan assembly to the
system board.
3
032756
Ha
a
HRG
24
2008
8
3:3
:37 P