Lenovo IdeaPad Y470p Lenovo IdeaPad Y470Y570 User Guide V1.0 - Page 47
System Memory, shows the total amount of memory installed in your computer.
View all Lenovo IdeaPad Y470p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Appendix. CRU instructions Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot). To make sure that the DDR3 SDRAM is installed correctly, do as follows: 1 Turn the computer on. 2 Hold F2 during startup. The BIOS setup utility screen opens. The System Memory item shows the total amount of memory installed in your computer. 43
Appendix. CRU instructions
43
To make sure that the DDR3 SDRAM is installed correctly, do as follows:
1
Turn the computer on.
2
Hold
F2
during startup. The BIOS setup utility screen opens. The
System Memory
item
shows the total amount of memory installed in your computer.
Note:
If only one DDR3 SDRAM is used on the computer you are servicing, the card must be installed in
SLOT-0 (
: lower slot), but not in SLOT-1 (
: upper slot).