Lenovo J200p Hardware Maintenance Manual - Page 66
Diagnostic
View all Lenovo J200p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Diagnostic Error Code 001-286-XXX 001-287-XXX 001-288-XXX System Timer failure 001-292-XXX System CMOS RAM error 001-293-XXX System CMOS Battery 001-298-XXX System RTC date/time update failure 001-299-XXX System RTC periodic interrupt failure 001-300-XXX System RTC Alarm failure 001-301-XXX System RTC Century byte error 005-000-XXX Video Test Passed 005-00X-XXX Video error 005-010-XXX 005-011-XXX 005-012-XXX 005-013-XXX Video Signal failure 005-016-XXX Video Simple Pattern test failure 005-024-XXX Video Addressing test failure 005-025-XXX Video Checksum Value error 005-027-XXX Video Configuration/Setup error 005-031-XXX Video Device Cable failure 005-032-XXX Video Device Controller failure 60 Hardware Maintenance Manual FRU/Action System board 1. Run Setup and re-test 2. System board 1. CMOS Battery 2. System board 1. Flash the system. See "Flash update procedures" on page 243 2. System board System board System board 1. Flash the system. See "Flash update procedures" on page 243 2. System board No action 1. Video card, if installed 2. System board 1. Video card, if installed 2. System board 1. Video Ram 2. Video card, if installed 3. System board 1. Video card, if installed 2. System board 1. Video card, if installed 2. System board 1. Run Setup 2. Video drivers update 3. Video card, if installed 4. System board 1. Video cable 2. Monitor 3. Video card, if installed 4. System board 1. Video card, if installed 2. System board