Lenovo K315 Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 31
Removing the computer cover
View all Lenovo K315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Removing the computer cover Attention Chapter 7. Replacing hardware Turn off the computer and wait 3 to 5 minutes to let the computer cool before removing the computer cover. To remove the computer cover: 1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut down your operating system, turn off all attached devices, and the computer. 2. Unplug all power cords from electrical outlets. 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Locating connectors on the rear of the computer". 4. Remove the two screws that secure the computer cover at the rear of the chassis. 5. Slide the computer cover to the rear of the chassis to remove. Note For this procedure, it helps to lay the computer on its side. 29