Lenovo K330 Lenovo IdeaCentre K3 Series Hardware Replacement Guide V4.0 - Page 24
Install the new heat sink and fan assembly on the heat sink retention bracket.
View all Lenovo K330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
7. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 8. Install the new heat sink and fan assembly on the heat sink retention bracket. 9. Reconnect the disconnected cables to the system board. 10. Refer to the "Completing the installation". Hardware Replacement Guide 21
21
Hardware Replacement Guide
7.
Use the thermal grease syringe to place five drops of grease on the top of the
microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the
grease syringe).
8.
Install the new heat sink and fan assembly on the heat sink retention bracket.
9.
Reconnect the disconnected cables to the system board.
10. Refer to the “Completing the installation”.