Lenovo K330B Lenovo IdeaCentre K3 Series Hardware Maintenance Manual - Page 40
Replacing the heat sink assembly
View all Lenovo K330B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Hardware Maintenance Manual Replacing the heat sink assembly Attention Do not remove the computer cover or attempt any repair before reading the "Important safety information" in the Safety and Warranty Guide that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or HMM, go to the Support Web site at http://consumersupport.lenovo.com To replace the heat sink assembly: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Lay the computer on its side. 3. Locate the heat sink. Refer to "Identifying parts on the system board". 4. Disconnect the heat sink and the fan assembly cable from the system board. 5. Remove the four screws securing the heat sink and fan assembly to the system board. 6. Lift the failing heat sink and fan assembly off the system board. 38