Lenovo L1940p User Guide - Page 10
according to IEC 60227 designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G
UPC - 884343074399
View all Lenovo L1940p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3. Connect the analog signal cable to the D-SUB connector of the monitor and the other end on the back of the computer. 4. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used. Chapter 1. Getting started 1-5
3.
Connect the analog signal cable to the D-SUB connector of the monitor and the
other end on the back of the computer.
4.
Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note
: A certified power supply cord has to be used with this equipment. The relevant
national installation and/or equipment regulations shall be considered. A certified
power supply cord not lighter than ordinary polyvinyl chloride flexible cord
according to IEC 60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G
0.75mm²) shall be used. Alternative a flexible cord be of synthetic rubber according
to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.
Chapter 1. Getting started
1-5