Lenovo L195 Wide Flat Panel Monitor L195 Wide Flat Panel Monitor User's Guides - Page 8

4. Connect the digital cable to the DVI connector of the monitor and the other end on the back of the computer. Note: The digital cable is not included with the monitor. Place the cable into the specific hook indicated in below figure. 5. Insert the power cord into the monitor ,then plug the monitor power cord and the computer cord into grounded electrical outlets. Place the cable into the specific hook indicated in below figure. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used. 6. Replace the Cable Cover. 1-4 L195 Wide Flat Panel Monitor User's Guide