Lenovo M50-70 Laptop (English) Hardware Maintenance Manual - Page 46

Hard disk drive, Attention

Get Lenovo M50-70 Laptop PDF manuals and user guides View all Lenovo M50-70 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

M50-70/M50-80 Hardware Maintenance Manual 1050 Hard disk drive For access, remove these FRUs in order: • "1010 Optical drive" on page 33 • "1020 Keyboard" on page 35 • "1030 Base cover" on page 37 • "1040 Battery pack" on page 40 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible. • Never remove the drive while the system is operating or in suspend mode. Figure 5. Removal steps of hard disk drive Remove the screws 1. Pull the hard disk driver in the direction shown by arrow 2.    Step Screw (quantity) 1 M2.0 × 3.0 mm, flat-head, nylok-coated (2) HDD Brkt to Up Color Torque Black 1.8±0.2 kgf*cm When installing: Make sure that the HDD connector is attached firmly. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
42
M50-70/M50-80 Hardware Maintenance Manual
1050 Hard disk drive
For access, remove these FRUs in order:
•
“1010 Optical drive” on page 33
•
“1020 Keyboard” on page 35
•
“1030 Base cover” on page 37
•
“1040 Battery pack” on page 40
Attention:
•
Do not drop the hard disk drive or apply any physical shock to it.
The hard
disk drive is sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
•
Before removing the drive, suggest the customer to backup all the information on
it if possible.
•
Never remove the drive while the system is operating or in suspend mode.
Figure 5. Removal steps of hard disk drive
Remove the screws
1
. Pull the hard disk driver in the direction shown
by arrow
2
.
±
±
²
Step
Screw (quantity)
Color
Torque
1
M2.0 × 3.0 mm, flat-head, nylok-coated (2)
HDD Brkt to Up
Black
1.8±0.2 kgf*cm
When installing:
Make sure that the HDD connector is attached firmly.