Lenovo Miix 10 Hardware Maintenance Manual - IdeaPad Miix 10 Tablet - Page 52

PCI Express Mini Card for wireless LAN, 1080 Touch Pad Board

Page 52 highlights

IdeaPad Miix 10 Hardware Maintenance Manual 1100 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: • "1010 LCD cover" on page 31 • "1020 Battery pack" on page 32 • "1030 3G card" on page 34 • "1040 Speakers" on page 36 • "1050 Audio Board" on page 38 • "1060 Power board" on page 40 • "1070 Docking Board" on page 42 • "1080 Touch Pad Board" on page 43 • "1090 System board" on page 45 Figure 10. Removal steps of PCI Express Mini Card for wireless LAN Disconnect the two wireless LAN cables (black, white) 1. 1 In step 1, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159), or pick up the connectors with your fingers and gently unplug them in the direction shown by the arrows. When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, and the grey cable (2nd) (AUX) into the jack labeled 2 on the card. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

48
IdeaPad Miix 10 Hardware Maintenance Manual
1100 PCI Express Mini Card for wireless LAN
For access, remove these FRUs in order:
“1010 LCD cover” on page 31
“1020 Battery pack” on page 32
“1030 3G card” on page 34
“1040 Speakers” on page 36
“1050 Audio Board” on page 38
“1060 Power board” on page 40
“1070 Docking Board” on page 42
“1080 Touch Pad Board” on page 43
“1090 System board” on page 45
Figure 10. Removal steps of PCI Express Mini Card for wireless LAN
Disconnect the two wireless LAN cables (black, white)
1
.
1
In step
1
, unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by the arrows.
When installing:
In models with a wireless LAN card that has two antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled
1
, and the grey cable (2nd)
(AUX) into the jack labeled
2
on the card.