Lenovo N20p Chromebook Hardware Maintenance Manual - Lenovo N20p Chromebook - Page 47
RemovetheG-sensorboard
View all Lenovo N20p Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
d e Figure 27. Disconnect the LCD cable and the touch module cable - the back side of the LCD panel Note: When disconnecting the LCD cable, peel off the sticker, open the metal bracket, and then pull out the connector. Step 5. Remove the LCD panel. Table 11. Screw specifications - removing the LCD panel Screw label 2 Specifications M2.5 × 5 mm, flat-head, nylon-coated Color Silvery Torque 3.7 - 4.0 kgf * cm Refer to Table 4 "Part numbers of LCD FRUs" on page 26 to look up the Lenovo part numbers of the following replacement parts: Hinge covers LCD panel Remove the G-sensor board Make sure the following FRUs (CRUs) have been removed: "Remove the LCD panel" on page 40 Step 1. Disconnect the cable 1 . b c a Figure 28. Remove the G-sensor board Step 2. Remove 1 screw 2 and then remove the G-sensor board 3 . Table 12. Screw specifications - removing the G-sensor Screw label 2 Specifications M2 × 2mm, flat-head, nylon-coated Color Black Torque 1.7 - 2.0 kgf * cm Chapter 4. Removing a FRU or CRU 41