Lenovo N300 Lenovo N300/308 All-In-One PC Hardware Maintenance Manual - Page 25

Replacing the front indicator board

Get Lenovo N300 PDF manuals and user guides View all Lenovo N300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Step 5. Disconnect the speaker cable from the connector on motherboard. Step 6. Detach the speaker system from the rubber screws, then lift up the speaker to remove it. Step 7. To install the new speaker system: a. Secure the new speaker system to the chassis with the rubber screws. b. Connect the new speaker cable to the connector on the motherboard. Step 8. Reattach the rear cover. Replacing the front indicator board Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover. To replace the front indicator board: Step 1. Step 2. Step 3. Step 4. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the rear cover. Refer to "Removing the rear cover". Chapter 4. Replacing hardware 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Step 5. Disconnect the speaker cable from the connector on motherboard.
Step 6. Detach the speaker system from the rubber screws, then lift up the speaker to remove it.
Step 7. To install the new speaker system:
a. Secure the new speaker system to the chassis with the rubber screws.
b. Connect the new speaker cable to the connector on the motherboard.
Step 8. Reattach the rear cover.
Replacing the front indicator board
Note:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
To replace the front indicator board:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the rear cover. Refer to "Removing the rear cover".
Chapter 4
.
Replacing hardware
19