Lenovo N500 User Guide - Page 34
Changing or Removing the Supervisor Password - will not boot
UPC - 884343605043
View all Lenovo N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Lenovo 3000 N500 UG V1.0_en.book Page 26 Monday, September 1, 2008 9:44 AM Chapter 2. Using Your Computer Changing or Removing the Supervisor Password To change the password, do the following: 1 Select Set Supervisor Password, and press the Enter key. The Set Supervisor Password window opens. 2 Choose your Supervisor password, which can be from one to eight alphanumeric characters in any combination. Select Enter Current Password and type in the correct password. Then press the Enter key once to move to the Enter New Password field, type in a new supervisor password. 3 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 4 Commit your password to memory, and press the Enter key. To remove password, do the following: 1 Select Set Supervisor Password, and press the Enter key. 2 Select Enter Current Password and type in the correct password, and finally press the Enter key thrice. Note: Make sure Password on boot is set to Enabled if you desire password protection at power on. 26