Lenovo NetVista A20 Hardware Maintenance Manual for NetVista 6266, 6270, 6276, - Page 57
Error Symptoms, Action/FRU, Parallel, Joystick, Diagnostic Program, Keyboard, Power Supply
View all Lenovo NetVista A20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Table 2-3 Error Symptoms List Error Symptoms Action/FRU NOTE: To diagnose a problem, first find the error symptom in the left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause. Display problem not listed above "Monitor" on page 68. (including blank or illegible monitor). Load default settings (if screen is readable). System board Parallel NOTE: Execute "Load BIOS Default Settings" in BIOS Setup to confirm ports' presence before diagnosing any parallel/serial ports problems. Serial or parallel port loop-back Make sure that the LPT# or COM# you test is the same as is set in test failed. BIOS Setup. Loop-back. System board. Printing failed. Make sure that the printer driver is properly installed. Refer to the service manual for the printer. Printer. Printer cable. System board. Printer problems. Refer to the service manual for the printer. Joystick Game port does not respond or Connect a joystick to the game port, then execute "Interactive does not work. Test/Joystick test" in PC-Doctor diagnostics program. System board. Diagnostic Program Diagnostics programs cannot be Reboot the system from the diagnostics diskette. executed. Load default settings. Diagnostics diskette. Memory module. System board. Missing diagnostics files(s). Diagnostics diskette. Keyboard Some or all keys on keyboard do "Keyboard" on page 64. not work. Power Supply Pressing power switch cannot See "Power Management Setup" on page 39. turn off system. (Only unplug Power switch cable assembly power cord from electrical outlet can turn off system.) "Power Supply" on page 66. System board Pressing power switch cannot turn on system. Check the voltage selector on the power supply if it is off. Power switch cable assembly. Executing software shutdown from Windows98 Start menu cannot turn off system. (Only pressing power switch can force system to turn off). Load default settings. Reload software from Recovery CD. No system power or power supply fan is not running. "Power Supply" on page 66. System board. 57