Lenovo NetVista A40 Hardware Maintenance Manual for NetVista 6018, 6058, 6059, - Page 32
Voltage Regulator Module VRM, Power supply
View all Lenovo NetVista A40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Diagnostic Error Code FRU/Action 170-197-XXXVoltage Sensor(s) test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 170-198-XXXVoltage Sensor(s) test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 170-199-XXXVoltage Sensor(s) test failed, cause 1. Go to the ″Undetermined problems″ section unknown 2. Flash the system and re-test 3. Replace component under function test 170-250-XXX 170-251-XXXVoltage Sensor(s) Voltage limit error 1. Power supply 2. System board 170-254-XXXVoltage Sensor(s) Voltage Regulator Module error 1. Voltage Regulator Module (VRM) 2. Microprocessor 3. System board 175-000-XXXThermal Sensor(s) Test Passed 1. No action 175-0XX-XXXThermal Sensor(s) failure 1. Flash system 2. System board 175-195-XXXThermal Sensor(s) Test aborted by 1. Information user 2. Re-start the test, if necessary 175-196-XXXThermal Sensor(s) test halt, error 1. Press F3 to review the log file threshold exceeded 2. Re-start the test to reset the log file 175-197-XXXThermal Sensor(s) test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 175-198-XXXThermal Sensor(s) test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to ″Undetermined problems″ section 18 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649