Lenovo PC 300PL Installing Options in your PC - 6892, 6285 - Page 40
Working with Adapters, Plug and Play, snapshot, About Your Software
View all Lenovo PC 300PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 4. Working with Adapters This chapter provides information and instructions for installing and removing adapters. Instructions for working with adapters for the riser card and for installing an Accelerated Graphics Port (AGP) adapter are discussed. When you are installing or removing adapters, it is important to resolve any resource conflicts that might arise. For example, if you install an ISA legacy adapter, you might need to manually configure the adapter by setting a variety of switches on the adapter and by using the Configuration/Setup Utility program. Many adapters now use Plug and Play technology, which enables the computer to automatically configure the adapter, provided that the required resources are available. Refer to the instructions that come with your adapter to determine if it is Plug and Play. For more information, see "Adapter Configuration" on page 29. Important Run ConfigSafe (or a similar application) to take a snapshot of your computer configuration before installing an optional device. This allows you to view and compare the changes in the computer configuration after you install an adapter. Also, if you have problems configuring the adapter after it is installed, ConfigSafe allows you to restore the configuration to the previous settings. ConfigSafe is a part of the preinstalled software in your computer. For more information, see About Your Software that comes with your computer. Be careful when working near the microprocessor. Under normal use, the microprocessor can become very hot. 26 © Copyright IBM Corp. 1998