Lenovo S20-00 Lenovo S20-00 Hardware Maintenance Manual - Page 29
b. Line up the holes on the rear cover with mounting holes on the front bezel, and place the rear
View all Lenovo S20-00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Step 4. Remove the two screws that secure the rear cover to the front bezel. Step 5. Use a flat head screwdriver push into the slot in-between the rear cover and front bezel, and separate the rear cover from the front bezel. Step 6. Disconnect the LVDS cable to separate the rear cover from the front bezel. Step 7. To reattach the rear cover: a. Line up the rear cover with the front bezel and reconnect the LVDS cable. b. Line up the holes on the rear cover with mounting holes on the front bezel, and place the rear cover into position. c. Secure the rear cover to the front bezel with the two screws. Chapter 7. Replacing hardware 23
Step 4. Remove the two screws that secure the rear cover to the front bezel.
Step 5. Use a flat head screwdriver push into the slot in-between the rear cover and front bezel, and
separate the rear cover from the front bezel.
Step 6. Disconnect the LVDS cable to separate the rear cover from the front bezel.
Step 7. To reattach the rear cover:
a. Line up the rear cover with the front bezel and reconnect the LVDS cable.
b. Line up the holes on the rear cover with mounting holes on the front bezel, and place the rear
cover into position.
c. Secure the rear cover to the front bezel with the two screws.
Chapter 7
.
Replacing hardware
23