Lenovo S435 Laptop Hardware Maintenance Manual - Lenovo S435 - Page 46
Fan assembly and Heat Sink assembly, and two screws
View all Lenovo S435 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Lenovo S435 Hardware Maintenance Manual 1060 Fan assembly and Heat Sink assembly For access, remove these FRUs in order: • "1010 Battery pack" on page 35 • "1020 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot compartment cover" on page 36 Figure 6. Removal steps of fan assembly and heat sink assembly Unplug the fan connector in the direction shown by arrow a. a When installing: Make sure that the fan connector is attached firmly to the system board. Remove six screws b and two screws c . c b b bb b cb Step b Screw (quantity) M2 × 3 mm, flat-head, nylokcoated (6) M2 × 5 mm, flat-head, nylokcoated (2) Color Silver Black Torque 1.85+/-0.15 kgfcm 1.85+/-0.15 kgfcm 42
Lenovo S435 Hardware Maintenance Manual
42
1060 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 35
•
“1020 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 36
Figure 6. Removal steps of fan assembly and heat sink assembly
Unplug the fan connector in the direction shown by arrow
When installing:
Make sure that the fan connector is attached firmly to the
system board.
Remove six screws
and two screws
.
Step
Screw (quantity)
Color
Torque
M2 × 3 mm, flat-head, nylok-
coated (6)
M2 × 5 mm, flat-head, nylok-
coated (2)
Silver
Black
1.85+/-0.15 kgfcm
1.85+/-0.15 kgfcm
a
a
b
c
c
b
b
b
b
b
c
b
b