Lenovo SL500 Hardware Maintenance Manual - Page 53
symptoms, No-beep
UPC - 884942236907
View all Lenovo SL500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Beep symptoms Table 3. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD. 1. Reseat the LCD connector. 2. LCD assembly. 3. External CRT. 4. System board. One long and two short beeps, and a blank or unreadable LCD. 1. System board. 2. LCD assembly. 3. DIMM. Two short beeps with error codes. POST error. See "Numeric error codes" on page 39. Two short beeps and a blank screen. 1. System board. 2. DIMM. Three short beeps, pause, three more short 1. DIMM. beeps, and one short beep. 2. System board. One short beep, pause, three short beeps, Reinstall the operating system. pause, three more short beeps, and one short beep. Only the cursor appears. Five short beeps and a blank screen. System board. No-beep symptoms Table 4. No-beep symptoms Symptom or error FRU or action, in sequence No beep, power-on indicator on, LCD blank, 1. Make sure that every connector is and no POST. connected tightly and correctly. 2. DIMM. 3. System board. No beep, power-on indicator on, and LCD blank during POST. 1. Reseat DIMM. 2. System board. The power-on password prompt appears. A power-on password or a supervisor password is set. Type the password and press Enter. The hard-disk password prompt appears. A hard-disk password is set. Type the password and press Enter. Related service information 45