Home » Lenovo Manuals » Servers » Lenovo Secure Managed Client » Manual Viewer

Lenovo Secure Managed Client Hardware Maintenance Manual - Page 88

Lenovo Secure Managed Client Manual

View all Lenovo Secure Managed Client manuals

Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

7. If removing a processor air duct as part of another procedure, continue with that procedure. Installing the processor air duct To install the processor air duct, complete the following steps: CAUTION: Do not operate the Secure Managed Client - Storage Array without the presence of a processor air duct. Attention: Before performing any maintenance on the system, back up the data. Follow the instructions in the Secure Managed Client - Storage Array User Guide for shutting down the system.: 1. Observe all safety and ESD precautions in the Safety and Warranty Guide. 2. If enclosure cover is not already removed, remove it. For instructions. 3. Install the processor air duct by aligning pins with slots (see 1 in the following figure). 82 Hardware Maintenance Manual

Section	Page
Contents	5
Chapter 1. About this manual	7
Introduction	7
Product contents, order options, and accessories	7
Important information about replacing RoHS compliant FRUs	7
Chapter 2. Safety information	9
General safety	9
Electrical safety	9
Safety inspection guide	11
Handling electrostatic discharge-sensitive devices	12
Grounding requirements	12
Safety notices (multi-lingual translations)	13
Chapter 3. General information	43
Additional information resources	43
Chapter 4. General Checkout	45
Checking for power problems	45
Problem determination tips	45
Chapter 5. Diagnostics	47
PC-Doctor for DOS	47
Creating a diagnostic CD image	47
Running diagnostics from the CD or diskettes	47
Navigating through the diagnostics programs	47
Running tests	47
Test results	48
Quick and Full erase - hard drive	48
Viewing the test log	49
Chapter 6. Using the Setup Utility	51
Starting the Setup Utility program	51
Viewing and changing settings	51
Using passwords	51
Password considerations	52
User Password	52
Administrator Password	52
Setting, changing, and deleting a password	52
Selecting a startup device	52
Selecting or changing the startup device sequence	52
Advanced settings	53
Exiting from the Setup Utility program	53
Chapter 7. Troubleshooting and problem solving	55
Initial start-up problems	55
Faulty cords	55
Alarm sounds and power up	55
Storage array does not recognize the subsystem	55
LEDs	55
Power supply units	55
Front operators panel	56
Cooling fan LEDs	57
Drive carrier module LEDs	57
Rear panel LED	57
Server board LEDs	57
I/O panel status LEDs	57
I/O panel NIC LEDs	57
Audible alarms	58
Alarm interpretation	58
Troubleshooting	60
System faults	60
Power supply unit faults	60
Cooling fan faults	60
Thermal cooling	61
Drive carrier module faults	61
Dealing with hardware faults	62
Continuous operation during replacement	62
Chapter 8. Features	63
Enclosure subsystem	64
Enclosure chassis	65
Server board subdivision	66
Server board I/O panel	67
Connectors	67
Server board LEDs	67
Front operators panel	67
Rear panel	68
Power supply unit	68
Power supply output connectors	69
Cooling fans	69
Drive carrier module	70
Drive status indicator	71
Anti-tamper locks	71
Removing and installing a processor	71
Installing the processor	72
Removing a processor	75
Replacing a server board	77
Boot drive options	83
Intel storage server 55R212MC2 Boot Drive Options	84
Intel Storage Server SSR212MC2R Boot Drive Options	85
Installing an add-in board	86
Removing and installing the processor air duct	87
Removing the processor air duct	87
Installing the processor air duct	88
Chapter 9. FRU lists	89
Machine Type 8332	89
Chapter 10. Additional Service Information	93
Security features	93
Hardware controlled Passwords	93
Operating system password	93
Vital product data	93
BIOS levels	93
Flash update procedures	93
Updating (flashing) BIOS from a diskette or CD-ROM	94
Recovering from a POST/BIOS update failure	94
Power management	95
Automatic configuration and power interface (ACPI) BIOS	95
Automatic Power-On features	95
Appendix. Notices	97

Match case Limit results 1 per page

removing

processor

air

duct

part

another

procedure,

continue

with

that

procedure.

Installing

the

processor

air

duct

install

the

processor

air

duct,

complete

the

following

steps:

CAUTION:

not

operate

the

Secure

Managed

Client

Storage

Array

without

the

presence

processor

air

duct.

Attention:

Before

performing

any

maintenance

the

system,

back

the

data.

the

instructions

the

Secure

Managed

Client

Storage

Array

User

Guide

for

shutting

down

the

system.:

Observe

all

safety

and

ESD

precautions

the

Safety

and

Warranty

Guide

enclosure

cover

not

already

removed,

remove

it.

For

instructions.

Install

the

processor

air

duct

aligning

pins

with

slots

(see

±1²

the

following

figure).

Hardware

Maintenance

Manual