Lenovo T60p Hardware Maintenance Manual - Page 55
Error, messages - memory installation
![]() |
UPC - 882861293056
View all Lenovo T60p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Error messages Symptom or error Device address conflict. Allocation error for device. Failing bits: nnnn. Invalid system configuration data. I/O device IRQ conflict. Hibernation error. Fan error. Thermal sensing error. Authentication of system services failed. Press to resume. Cannot boot from any device. Symptom-to-FRU index FRU or action, in sequence 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. Load "Setup Defaults" in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. Restore the system configuration to what it was before the computer entered hibernation mode. 2. If memory size has been changed, re-create the hibernation file. 1. Fan. 2. Thermal grease. 3. System board. System board. The Predesktop Area in the HDD is corrupted. Restore it from a recovery CD. Check the status of device which you want to boot from. Device not found. 1. The device you want to boot from. 2. System board. Device Error. 1. The device you want to boot from. 2. System board. No valid operating system. 1. Check that the operating system has no failure and is installed correctly. 2. Reinstall the operation system. Excluded from boot order. v Enter the BIOS Setup Utility and add the device in boot order. ThinkPad T60, T60p 49
![](/manual_guide/products/lenovo-t60p-hardware-maintenance-manual-f768fcb/55.png)