Lenovo ThinkCentre A50p Hardware Maintenance Manual (HMM) - Page 55
master/slave
View all Lenovo ThinkCentre A50p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4. For all drives except the hard disk drive, push in on the metal tab that secures the drive being removed. The hard disk drive tray pivots out toward the front of the computer for removal of the hard disk drive. See the following illustrations. For the hard disk drive, see the illustration below. 5. Slide the drive out the front of the computer. Installing a drive 1. If you are installing a parallel drive, make sure the drive is set correctly as either a master or a slave device. Jumper the new drive the same as the drive being replaced. Serial ATA hard disk drives do not require a master/slave jumper. Refer to the documentation that comes with your drive for master/slave jumper information. 2. Slide the drive into the appropriate bay. Chapter 6. Replacing FRUs 49