Lenovo ThinkCentre Edge 71z Hardware Maintenance Manual - Page 76
PCI Card Test Passed, PCI Card Failure
View all Lenovo ThinkCentre Edge 71z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Diagnostic Error Code 015-196-XXX USB port test halt, error threshold exceeded 015-197-XXX USB port test warning 015-198-XXX USB port test aborted 015-199-XXX USB port test failed, cause unknown 018-000-XXX PCI Card Test Passed 018-0XX-XXX PCI Card Failure 018-195-XXX PCI Card Test aborted by user 018-196-XXX PCI Card test halt, error threshold exceeded 018-197-XXX PCI Card test warning 018-198-XXX PCI Card test aborted 018-199-XXX PCI Card test failed, cause unknown FRU/Action 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 57. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 57. 2. Flash the system and re-test. See "Flash update procedures" on page 167. 3. Go to "Undetermined problems" on page 82. 1. Go to "Undetermined problems" on page 82. 2. Flash the system and re-test. See "Flash update procedures" on page 167. 3. Replace component under function test. No action 1. Riser card, if installed. 2. System board 1. PCI card 2. Information only Restart the test, if necessary 1. Press F3 to review the log file 2. Restart the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 57. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 57. 2. Flash the system and re-test. See "Flash update procedures" on page 167. 3. Go to "Undetermined problems" on page 82. 1. Go to "Undetermined problems" on page 82. 2. Flash the system and re-test. See "Flash update procedures" on page 167. 3. Replace component under function test. 70 ThinkCentre Edge Hardware Maintenance Manual