Lenovo ThinkCentre M90p Hardware Maintenance Manual - Page 56
Diagnostic Error Code, System Device Reset condition detected
View all Lenovo ThinkCentre M90p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Diagnostic Error Code 001-032-XXX System Device Controller failure 001-034-XXX System Device Buffer Allocation failure 001-035-XXX System Device Reset condition detected 001-036-XXX System Register error 001-038-XXX System Extension failure 001-039-XXX System DMI data structure error 001-040-XXX System IRQ failure 001-041-XXX System DMA failure 001-195-XXX System Test aborted by user 001-196-XXX System test halt, error threshold exceeded 001-197-XXX System test warning 001-198-XXX System test aborted 001-199-XXX System test failed, cause unknown 001-250-XXX System ECC error 001-254-XXX 001-255-XXX 001-256-XXX 001-257-XXX System DMA error 001-260-XXX 001-264-XXX System IRQ error 001-268-XXX System IRQ1 failure 001-269-XXX System IRQ2 failure FRU/Action System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 392. 3. Run memory test 4. System board System board System board 1. Adapter card 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 392. 2. System board 1. Turn off/on the system and re-test. 2. System board 1. Turn off/on the system and re-test. 2. System board Information only Restart the test, if necessary. 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 1. Make sure the component that is called out is connected and/or enabled. See "" on page . 2. Re-run test 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See "" on page . 2. Flash the system and retest. See "Updating (flashing) BIOS from a disc" on page 392. 3. Go to "Undetermined problems" on page 64. 1. Go to "Undetermined problems" on page 64. 2. Flash the system and re-test. 3. Replace component under function test. System board System board System board 1. Device on IRQ1 2. System board 1. Device on IRQ2 2. System board 48 ThinkCentre Hardware Maintenance Manual