Lenovo ThinkCentre M92 (English) User Guide - Page 65
Install the solid state drive into the hard disk drive bay. See Replacing the hard disk drive
View all Lenovo ThinkCentre M92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
To install the solid state drive, do the following: 1. Install the solid state drive into the adapter. Then, install the four screws to secure the solid state drive to the adapter. Figure 36. Installing the solid state drive into the adapter 2. To install the solid state drive with the adapter into the 3.5-inch hard disk drive bracket, flex the bracket and align pin 1 , pin 2 , pin 3 , and pin 4 on the bracket with the corresponding holes in the adapter. Figure 37. Installing the solid state drive with the adapter into the hard disk drive bracket 3. Connect the signal cable and the power cable to the solid state drive. 4. Install the solid state drive into the hard disk drive bay. See "Replacing the hard disk drive" on page 54. Chapter 5. Installing or replacing hardware 53