Lenovo ThinkPad 130 ThinkPad 130, 1200, 1300 - Hardware Maintenance Manual (Oc - Page 32
System board/LCD/Inverter replacement notice, Restoring the LCD panel ID
View all Lenovo ThinkPad 130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Turn an additional 90 degrees after the screw head touches the surface of the plastic part: v Logic card to plastic Turn an additional 180 degrees after the screw head touches the surface of the plastic part: v Torque driver If you have a torque driver, refer to the ″Torque″ column with each step. v Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screws are tightened firmly. System board/LCD/Inverter replacement notice Restoring the LCD panel ID The EEPROM on the inverter stores its supported LCD type ID code. If you replace a LCD with one of a different brand or use a new inverter, the ID information in the inverter EEPROM should be updated. Follow the steps blew to set the LCD panel ID: 1. Install the ThinkPad CE Utility Diskette and restart the computer. 2. Select 1. LCD Panel ID Utility from the main menu. 22 ThinkPad i Series 1200/1300 HMM