Lenovo ThinkPad 380E TP 380Z Hardware Maintenance Manual (August 1998) for use - Page 9
Reset Switch, When Both Power-on Password and Supervisor, Password are Set., supervisor password
View all Lenovo ThinkPad 380E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
When Both Power-on Password and Supervisor Password are Set. 1. Power off the computer. 2. Press and hold F1; then power on the computer. After a few seconds, the password prompt appears. 3. Enter your supervisor password. The Easy-Setup Main Menu appears. 4. Select Password and then Power on. A rectangular box appears. 5. Enter your supervisor password and press the Space bar once. 6. Press Enter twice. 7. Select Exit. 8. Select Restart on the Easy-Setup Main Menu and wait until the POST ends. 9. Reinstall the memory-slot cover, and turn the computer right side up. Verify that the password prompt does not appear. To reactivate the password, set the password again. Reset Switch: The Reset switch resets the system regardless of the microcode status and forces a power off. Use this push button to power off when power is not completely off or when the microcode is in a hung state. ThinkPad 380Z 7