Lenovo ThinkPad 600E TP 600E Supplement to User's Reference - Page 4
Corrections to the User's Reference - disassembly
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
11 Select ThinkPad Hot/Warm Swap Driver, and click on Next. 12 Click on Finish. 13 Restart the computer. Corrections to the User's Reference This section corrects information in the User's Reference. Use this information instead of the corresponding information in the User's Reference. The term UltraslimBay tray in the User's Reference should be UltraBay tray. If you want to use two diskette drives at the same time, you need to install one drive in the UltraslimBay. The secondary drive can be one of the following: - Attached to the computer's external diskette drive connector - Attached through the port replicator - In the bay of the docking station If you dock your computer to a docking station: - If you use a SelectaDock I or SelectaDock II docking station, connect the power cord to a docking station and connect the AC Adapter to a SelectaBase 600 port replicator. - If you use a SelectaDock III docking station, connect the power cord to the docking station. Protection Notice Requirement This device is protected by U.S. patent numbers 4631603, 4577216, 4819098, 4907093, and other intellectual property rights. The use of Macrovision's copy protection technology in the device must be authorized by Macrovision and is intended for home and other limited pay-per-view use only, unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited. 4