Lenovo ThinkPad 760EL-ELD ThinkPad 380, 385, 560, 560E, all 760, 765 and Selec - Page 429
System Board and CPU Card Checkout
View all Lenovo ThinkPad 760EL-ELD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 429 highlights
Note: Make sure that the DIMM adapter card is fully installed into the connector. A loose connection can cause an error. 1. Power off the computer and remove the DIMM adapter card from its slot (if installed). 2. Press and hold the F1 key; then power on the computer. Hold the F1 key down until the Easy-Setup screen appears. 3. Select Test and press Enter. 4. Select Memory and press Enter to run the memory test on base memory. If an error appears, replace the system board. 5. Power off the computer and reinstall the DIMM adapter card; then power on the computer. Verify the memory size; then test the memory. If an error appears, replace the DIMM adapter card. If memory problems occur intermittently, use the loop option to repeat the test. When the test detects an error, an error log is printed on the printer connected to the parallel port. See "Displaying the Error Log" on page 450 for more information. System Programs in Flash Memory: System setup programs and diagnostic tests are stored in flash memory. Flash Memory Update: A flash memory update is required for the following conditions: New versions of system programs New features or options To update the flash memory, do the following: 1. Get the appropriate diskette containing the update. 2. Insert the System Program Service diskette into drive A, and power on the computer with ac power and a fully charged battery. 3. Select Update system programs from the menu. System Board and CPU Card Checkout The processing functions are performed by both the system board and the CPU card. Processor problems can be caused by either FRU. However, the CPU card generally has a lower probability of failure. If a numeric code indicates the system board or the CPU card as a failing FRU, or the CPU card is indicated by a diagnostic test by showing FRU code 11, use the following procedure to isolate the problem: 1. Run the system board test to verify the symptom. This test verifies both the system board and the CPU card. If no error is detected, return to "Checkout Guide" on page 415. Note: Don't touch the keyboard and pointing device when the system board test is running. This may cause an unexpected error. ThinkPad 765D (9546), 765L (9547) 417