Lenovo ThinkPad A21e ThinkPad A2* Series Hardware Maintenance Manual (October - Page 110
The LCD cable for the 15.0-in. UXGA LCD 27L0598, remove the screws from both sides of the adapter
View all Lenovo ThinkPad A21e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Removing and replacing a FRU v For the 14-in. LCD, the LCD cable is taped onto the connector. Tear off the tape before disconnecting the LCD cable in step 4 . v The LCD cable for the 15.0-in. UXGA LCD (27L0598) and the LCD cable for the 15.0-in. SXGA+ LCD (27L0488) have the UltraPort connector and need step 6 . If the UltraPort adapter has been screwed onto the LCD, remove the adapter before step 6 . To do this, remove the screws from both sides of the adapter as shown in the figure 2a . For other cable, do as shown in the figure 2b . 104 ThinkPad A20m/p, A21m/p, A22m/p
v
For the 14-in. LCD, the LCD cable is taped onto the
connector. Tear off the tape before disconnecting the
LCD cable in step
±4²
.
v
The LCD cable for the 15.0-in. UXGA LCD (27L0598)
and the LCD cable for the 15.0-in. SXGA+ LCD
(27L0488) have the UltraPort connector and need step
±6²
. If the UltraPort adapter has been screwed onto the
LCD, remove the adapter before step
±6²
. To do this,
remove the screws from both sides of the adapter as
shown in the figure
±2a²
. For other cable, do as shown
in the figure
±2b²
.
Removing and replacing a FRU
104
ThinkPad A20m/p, A21m/p, A22m/p