Lenovo ThinkPad Edge E10 Hardware Maintenance Manual - Page 74
I/O board, 1030 Hard disk drive or solid state drive
View all Lenovo ThinkPad Edge E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Table 16. Removal steps of BDC-2 1 Step 1 Screw (quantity) M2 × 3 mm, small-head, nylon-coated (1) When installing: Make sure that the connector is attached firmly. Color Silver Torque 0.181 Nm (1.85 kgfcm) 1100 I/O board For access, remove these FRUs in order: • "1010 Battery pack" on page 54 • "1020 Bottom door" on page 56 • "1030 Hard disk drive or solid state drive" on page 58 • "1070 Keyboard" on page 61 • "1080 Palm rest assembly, power-on board assembly (with cable), and microphone" on page 64 68 Hardware Maintenance Manual
Table 16. Removal steps of BDC-2
1
Step
Screw (quantity)
Color
Torque
1
M2 × 3 mm, small-head, nylon-coated (1)
Silver
0.181 Nm
(1.85 kgfcm)
When installing:
Make sure that the connector is attached firmly.
1100 I/O board
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 54
•
“1020 Bottom door” on page 56
•
“1030 Hard disk drive or solid state drive” on page 58
•
“1070 Keyboard” on page 61
•
“1080 Palm rest assembly, power-on board assembly (with cable), and microphone” on page 64
68
Hardware Maintenance Manual