Lenovo ThinkPad Edge E40 Hardware Maintenance Manual - Page 87
When installing, Attention, Table 25. Removal steps of LCD unit continued
View all Lenovo ThinkPad Edge E40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Table 25. Removal steps of LCD unit (continued) 1 M2.5 × 6.5 mm, wafter-head, nylon-coated (2) 2 2 Black 0.392 Nm (4 kgfcm) 3 When installing: Make sure that the connectors are attached firmly to the system board. In step 4 , release wireless antenna cables from the cable guides. 4 4 4 4 4 4 4 4 4 4 4 When installing: Make sure that the cables are attached to the cable guides firmly . Attention: When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. Chapter 8. Removing or replacing a FRU 81
Table 25. Removal steps of LCD unit (continued)
1
M2.5 × 6.5 mm, wafter-head, nylon-coated (2)
Black
0.392 Nm
(4 kgfcm)
2
2
3
When installing:
Make sure that the connectors are attached firmly to the system board.
In step
4
, release wireless antenna cables from the cable guides.
4
4
4
4
4
4
4
4
4
4
4
When installing:
Make sure that the cables are attached to the cable guides firmly .
Attention:
When you route the cables, make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Chapter 8
.
Removing or replacing a FRU
81