Lenovo ThinkPad X230i Hardware Maintenance Manual - Page 39
Numeric error codes, Run the ThinkPad Setup program. Press F9,
View all Lenovo ThinkPad X230i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Numeric error codes Table 1. Numeric error codes Symptom or error FRU or action, in sequence 0175 Bad CRC1, stop POST task - The EEPROM checksum is not correct. System board. 0176 System Security - The system has been tampered with. 1. Run the ThinkPad Setup program, and save the current setting by pressing F10. 2. System board. 0177 Bad SVP data, stop POST task - The checksum of the supervisor password in the EEPROM is not correct. System board. 0182 Bad CRC2. Enter the ThinkPad Setup program and load Setup defaults. - The checksum of the CRS2 setting in the EEPROM is not correct. 1. Run the ThinkPad Setup program. Press F9, and Enter to load the default setting. Then save the current setting by pressing F10. 2. System board. 0185 Bad startup sequence settings. Enter the ThinkPad Setup program and load Setup defaults. 1. Run the ThinkPad Setup program. Press F9, and Enter to load the default setting. Then save the current setting by pressing F10. 0187 System board. EAIA data access error - The access to EEPROM is failed. 0188 Invalid RFID Serialization Information Area. System board. 0189 System board. Invalid RFID configuration information area - The EEPROM checksum is not correct. 0190 Critical low-battery error 1. Charge the battery pack. 2. Battery pack. 0191 System Security - Invalid Remote Change requested. 1. Run the ThinkPad Setup program, and then save current setting by pressing F10. 2. System board. 0192 System Security - Embedded Security hardware tamper detected. System board. 0193 RF antenna has been removed Enter the supervisor password. 0194 The computer has been carried through a security gate Enter the supervisor password. 0195 Security hardware tamper detected 1. Enter the ThinkPad Setup program by entering supervisor password, and select Password ➙ Security Chip ➙ Clear Security Chip to clear this error. 2. Security chip. 3. System board. 0196 Security hardware removed 1. Enter the ThinkPad Setup program by entering supervisor password, and select Password ➙ Security Chip ➙ Clear Security Chip to clear this error. 2. Security chip. 3. System board. Chapter 4. Related service information 33