Lenovo ThinkPad X60s Hardware Maintenance Manual - Page 52

authentication. - setup usb

Get Lenovo ThinkPad X60s PDF manuals and user guides View all Lenovo ThinkPad X60s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Symptom-to-FRU index Symptom or error FRU or action, in sequence 1805 Unauthorized Wireless USB card is plugged in-Power off and remove the Wireless USB card. 1. Remove the Wireless USB card that you installed. 2. System board. 1810 Hard disk partition layout error. 1. If the Access Predesktop Area has been previously disabled, then go to the BIOS Setup Utility by pressing F1 to open the BIOS Setup Utility. Select Security --> Predesktop Area --> Access Predesktop Area. Set this item to Disabled. Save and exit. 2. If the Access Predesktop Area has not been previously disabled, press Enter to load Access Predesktop Area. Then run RECOVER TO FACTORY CONTENTS in Access Predesktop Area. 3. If item 2 failed, press F3 in the Welcome screen in RECOVER TO FACTORY CONTENTS. Run FDISK, and then delete all partitions. Run RECOVER TO FACTORY CONTENTS in Access Predesktop Area again. 4. If item 3 failed, select CD-ROM boot in Startup in Access Predesktop Area. Boot from the Recovery CD and perform full recovery from it. 5. If item 4 failed, replace the hard disk drive. 1820 More than one external fingerprint reader is attached. Power off and remove all but the reader that you set up within your main operating system. Remove all but the reader that you set up for the authentication. 2000 Hard Drive Active Protection sensor diagnostics failed. Press to continue. Press to enter SETUP 1. Undock docking station or port replicator if it is attached to the ThinkPad computer, and place the computer on a horizontal surface. Do not apply any physical shock to the computer. 2. Run Diagnostics --> ThinkPad Devices --> HDD Active Protection Test. 2010 Warning: Your internal hard disk drive (HDD) may not function correctly on this system. Ensure that your HDD is supported on this system and that the latest HDD firmware is installed. Inform the following information to the customer: If in the primary bay the customer is using a non-IBM or non-Lenovo hard disk drive (HDD), or an old generation IBM HDD which is not supported by this system, with the risk in mind, the customer can still use it by pressing ESC. If in the primary drive bay the customer is using a supported IBM/Lenovo HDD with an old firmware, the customer needs to update its firmware to the latest. The latest version is available at http://www.lenovo.com/support 2100 Initialization error on HDD0 (Main hard disk drive) 1. Reseat the hard disk drive. 2. Main hard disk drive. 3. System board. 46 ThinkPad® X60, X60s, X61, and X61s

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
Symptom
or
error
FRU
or
action,
in
sequence
1805
Unauthorized
Wireless
USB
card
is
plugged
in—Power
off
and
remove
the
Wireless
USB
card.
1.
Remove
the
Wireless
USB
card
that
you
installed.
2.
System
board.
1810
Hard
disk
partition
layout
error.
1.
If
the
Access
Predesktop
Area
has
been
previously
disabled,
then
go
to
the
BIOS
Setup
Utility
by
pressing
F1
to
open
the
BIOS
Setup
Utility.
Select
Security
-->
Predesktop
Area
-->
Access
Predesktop
Area.
Set
this
item
to
Disabled.
Save
and
exit.
2.
If
the
Access
Predesktop
Area
has
not
been
previously
disabled,
press
Enter
to
load
Access
Predesktop
Area.
Then
run
RECOVER
TO
FACTORY
CONTENTS
in
Access
Predesktop
Area.
3.
If
item
2
failed,
press
F3
in
the
Welcome
screen
in
RECOVER
TO
FACTORY
CONTENTS
.
Run
FDISK,
and
then
delete
all
partitions.
Run
RECOVER
TO
FACTORY
CONTENTS
in
Access
Predesktop
Area
again.
4.
If
item
3
failed,
select
CD-ROM
boot
in
Startup
in
Access
Predesktop
Area.
Boot
from
the
Recovery
CD
and
perform
full
recovery
from
it.
5.
If
item
4
failed,
replace
the
hard
disk
drive.
1820
More
than
one
external
fingerprint
reader
is
attached.
Power
off
and
remove
all
but
the
reader
that
you
set
up
within
your
main
operating
system.
Remove
all
but
the
reader
that
you
set
up
for
the
authentication.
2000
Hard
Drive
Active
Protection
sensor
diagnostics
failed.
Press
<Esc>
to
continue.
Press
<F1>
to
enter
SETUP
1.
Undock
docking
station
or
port
replicator
if
it
is
attached
to
the
ThinkPad
computer,
and
place
the
computer
on
a
horizontal
surface.
Do
not
apply
any
physical
shock
to
the
computer.
2.
Run
Diagnostics
-->
ThinkPad
Devices
-->
HDD
Active
Protection
Test
.
2010
Warning:
Your
internal
hard
disk
drive
(HDD)
may
not
function
correctly
on
this
system.
Ensure
that
your
HDD
is
supported
on
this
system
and
that
the
latest
HDD
firmware
is
installed.
Inform
the
following
information
to
the
customer:
If
in
the
primary
bay
the
customer
is
using
a
non-IBM
or
non-Lenovo
hard
disk
drive
(HDD),
or
an
old
generation
IBM
HDD
which
is
not
supported
by
this
system,
with
the
risk
in
mind,
the
customer
can
still
use
it
by
pressing
ESC.
If
in
the
primary
drive
bay
the
customer
is
using
a
supported
IBM/Lenovo
HDD
with
an
old
firmware,
the
customer
needs
to
update
its
firmware
to
the
latest.
The
latest
version
is
available
at
2100
Initialization
error
on
HDD0
(Main
hard
disk
drive)
1.
Reseat
the
hard
disk
drive.
2.
Main
hard
disk
drive.
3.
System
board.
Symptom-to-FRU
index
46
ThinkPad
®
X60,
X60s,
X61,
and
X61s