Lenovo ThinkPad i Series s30 ThinkPad S30, S31 Hardware Maintenance Manual (Oc - Page 23
Symptom-to-FRU Index, Numeric Error Codes
View all Lenovo ThinkPad i Series s30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Symptom-to-FRU Index The Symptom-to-FRU Index lists the symptoms and errors and the possible causes. The most likely cause is listed first. Note: Perform the FRU replacement or actions in the sequence shown in the FRU/Action columns. If a FRU replacement does not solve the problem, put the original part back in the computer. Do not replace a non-defective FRU. This index can also be used to help you decide the next possible FRUs to be replaced when servicing a computer. Numeric error codes show the errors detected in POST or system operation (runtime). In the following error codes, X can be any number. If no codes are available, use narrative symptoms. If the symptom is not listed, go to "Undetermined Problems" on page 25. Note: For IBM devices not supported by diagnostic codes in this ThinkPad computer, see the manual for that device. Numeric Error Codes The following is a list of the message that the BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the messages and remedies for reported problems. If the system fails after you make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults or correct the error. Symptom/Error FRU/Action in Sequence 0200 1. Reseat hard disk drive. Failure Fixed Disk 2. Load Setup Defaults in BIOS Setup Utility. 3. Hard disk drive 4. System board 0210 Keyboard error Go to "Keyboard and Auxiliary Input Device Checkout" on page 12. ThinkPad s30, s31 19