Lenovo ThinkServer RD120 Installation Instructions for Microsoft Windows Serve - Page 5
Post installation instructions: Installing and, updating device drivers
View all Lenovo ThinkServer RD120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
4.0 Post installation instructions: Installing and updating device drivers To install the device drivers and to identify hardware that is not functioning, open Device Manager. In Device Manager, non-functioning devices are usually listed under Other Devices and are indicated by a yellow exclamation point. To open Device Manager, complete the following steps: 1. Click Start. 2. Right-click My Computer. 3. Click Manage and select Device Manager in the left pane. The following sections include instructions for installing some device drivers. More device drivers might be available in the Driver matrices on the Lenovo Support Web site. 4.1 Installing the Broadcom NetXtreme Gigabit Ethernet device driver To install the Broadcom NetXtreme Gigabit Ethernet device driver, complete the following steps: 1. From an Internet-connected system with a diskette drive, go to: http://www.lenovo.com/support and select Driver matrices from the Quick links. 2. Click ThinkServer and then click your machine type to view the Drivers and software list. 3. Locate and click the link for the controller driver, and then click the executable file link. 4. Type c:\drivers\nic for the folder where the files are to be saved. Click Finish. 5. Click Yes to create the folder. 6. When the message "The package has been delivered successfully" is displayed, click OK. 7. Navigate to c:\drivers\nic, and open launch.exe. 8. Click Driver Installer. 9. In the Welcome window, click Next. 10. In the License Agreement window, read the agreement, then select I accept the terms in the license agreement, and click Next to continue. 11. Click Install to begin the installation. 12. When prompted to restart the server, select No, and click Finish. To configure the network, click: Start -> Control Panel -> Network Connections, and select New Connection Wizard to set up the network connection. To configure network protocols, right-click Local Area Connection in the Network connections window, and click Properties.