Lenovo ThinkServer RD120 Installation Instructions for Microsoft Window Server - Page 3
Post installation instructions: Installing and, updating device drivers - specifications
View all Lenovo ThinkServer RD120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
c. For Keyboard or input method, select US. 6. Click Next. 7. Click Install Now. 8. Type your product key. a. Check the Automatically activate Windows when I'm online check box and click Next. b. Scroll down and read the license agreement. c. Click I accept the license terms and click Next. 9. Select Custom (advanced). 10. When Windows Server 2008 Setup displays all hard disk storage that is available on the server, select one of the following options to choose or create a drive partition in which to install Windows Server 2008: o Allow Setup to create a partition: To partition the entire hard disk as one primary partition, highlight Disk0 unallocated space for the hard disk drive on which you want to install Windows Server 2008 and press Next. o Create a partition: To create a partition, highlight Disk0 unallocated space for the hard disk drive on which you want to install Windows Server 2008, click Drive options (advanced); then, click New. You are prompted to indicate how much available space to allocate from the nonpartitioned drive. Type the amount of space (in MB), click Apply; then, click Next. o Delete a partition. 11. Setup formats the selected partition and copies the applicable files to the drive partition. This process takes several minutes. When Windows Server 2008 Setup has completed installation, the server automatically restarts. 12. After Windows Server 2008 restarts, you will be prompted to change the administrator password before you can log on. 13. After you are logged on as the Administrator, a configuration wizard window is displayed. Use the wizard for naming and basic networking setup. 14. Next, use the Microsoft Server 2008 Roles and Features functions to setup the server to your specific needs. 4.0 Post installation instructions: Installing and updating device drivers After the installation is complete, make sure that you have the latest device drivers and firmware for the server. To install the device drivers and to identify hardware that is not functioning, open Device Manager. In Device Manager, non-functioning devices are usually listed under Other Devices and are indicated by a yellow exclamation point. To open Device Manager, complete the following steps: 1. Click Start.