Lenovo ThinkServer TD100 Installation Instructions for Microsoft Window Server - Page 2
Type an Array Label and press Enter.
View all Lenovo ThinkServer TD100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2. Click ThinkServer and then click your machine type to view the Drivers and software list. 3. Locate and click the link for the controller driver, and then click the executable file link. 4. Click I agree to accept the license agreement. 5. Insert a blank, formatted diskette, and click OK. The device driver files are then extracted to the diskette. Note: Adaptec drivers must be in the root directory of the diskette to install properly. 6. When prompted, click Quit. 3.2 Creating a logical array To create a logical array, complete the following steps: 1. Switch on the server. While the server is starting, press Ctrl + A. 2. Select Array Configuration Utility and press Enter. 3. Select Initialize drives. 4. Press the space bar to select the drives that you want to include in the array and press Enter. 5. Select Yes. 6. Press the space bar to select the drive. 7. For the Array Type, select Volume and press Enter. 8. Type an Array Label and press Enter. 9. Select Manage array to verify that the array was created successfully. 10. Press Esc, and then press Esc again. 11. Select Yes. 12. The server reboots. 13. Press F12 to open the Boot menu and select and select CD Drive to set the server to boot from the Windows Server 2008 Setup CD. 3.3 Installing Windows Server 2008 To install Microsoft Windows Server 2008, complete the following steps: 1. Connect the server to a network as required. 2. Depending on your server, you might need to attach an external DVD reader device. 3. Turn on the server and insert the Windows Server 2008 Setup DVD into the DVD drive. 4. When you are prompted with the message "press any key to boot from cd or dvd", press any key. Windows Server 2008 Setup copies the files from the Setup DVD. Windows load the files (this process takes several minutes). 5. In the Windows Server 2008 window, select the following: a. For Language to install, select English. b. For Time and currency format, select English (United States).