Lenovo USB Port Replicator with Digital Video User Guide - Page 14
Using the DVI-I to VGA adapter, Using the Ethernet connector - windows 7
UPC - 884942138713
View all Lenovo USB Port Replicator with Digital Video manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using the DVI-I to VGA adapter The port replicator includes a DVI-I to VGA adapter, which supports a connection to an external monitor with a VGA connector. To use the DVI-I to VGA adapter, do the following: 1. Connect the DVI-I to VGA adapter to the DVI-I video output connector on the port replicator. 2. Tighten the two screws on the DVI-I to VGA adapter. 3. Connect the VGA connector of the external monitor to the DVI-I to VGA adapter. You can adjust video settings to customize the use of the port replicator. See "Working with the Lenovo USB Port Replicator with Digital Video utility" on page 8. Note: For the best results, adjust the external monitor occasionally to realign its settings with the video output of the port replicator. For more information on the adjustment procedure, refer to the documentation that comes with your external monitor. Using the Ethernet connector Connect a standard 10 Mbps / 100 Mbps Ethernet connector to the Ethernet connector on the port replicator, and wait until the device is fully configured by the Windows operating system. The two LEDs (light-emitting diode) on the port replicator indicate the status of Ethernet connectivity: LED Power Link Color Green Green Description On for 100 Mbps. Off for 10 Mbps or not connected. Indicating LAN activity. Blinking when there is data transmission between the LAN and the host computer. 6 Lenovo USB Port Replicator with Digital Video User Guide