Lenovo V370 Laptop Lenovo V370 Hardware Maintenance Manual - Page 55

LCD unit, 1060 PCI Express Mini Card for wireless LAN

Get Lenovo V370 Laptop PDF manuals and user guides View all Lenovo V370 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Lenovo V370 1100 LCD unit For access, remove these FRUs in order: •• "1010 Battery pack" on page 34 •• "1020 Dummy card" on page 35 •• "1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot compartment cover" on page 36 •• "1040 Hard disk drive" on page 37 •• "1050 DIMM" on page 38 •• "1060 PCI Express Mini Card for wireless LAN" on page 39 •• "1070 Keyboard" on page 41 •• "1080 Keyboard bezel" on page 43 •• "1090 System board" on page 48 Figure 11. Removal steps of LCD unit Release the antenna cables from the cable guides in the direction shown by arrows 1. Remove two screws 2. 2 2 1 1 1 Step 2 Screw (quantity) M2.5 × 5 mm, flat-head, nylok-coated (2) Color Black Torque 3.0 kgfcm When installing: •• Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. •• Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides. 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
51
Lenovo V370
1100 LCD unit
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 34
•
“1020 Dummy card” on page 35
•
“1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 36
•
“1040 Hard disk drive” on page 37
•
“1050 DIMM” on page 38
•
“1060 PCI Express Mini Card for wireless LAN” on page 39
•
“1070 Keyboard” on page 41
•
“1080 Keyboard bezel” on page 43
•
“1090 System board” on page 48
Figure 11. Removal steps of LCD unit
Release the antenna cables from the cable guides in the direction shown by
arrows
1
. Remove two screws
2
.
1
1
1
2
2
Step
Screw (quantity)
Color
Torque
2
M2.5 × 5 mm, flat-head, nylok-coated (2)
Black
3.0 kgfcm
When installing:
Route the antenna cables along the cable guides. As you route the cables,
•
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached firmly and make sure that you
•
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.