Lenovo Y710 Laptop Y710 User Guide - Page 45
To set a User Password, Enter, Confirm New Password, Set Supervisor Password, Password on boot, Enable
View all Lenovo Y710 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 2. Using Your Computer 3 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 4 Commit your password to memory, and press the Enter key. To remove the password, do the following: 1 Select Set Supervisor Password, and press the Enter key. 2 Select Enter Current Password and type in the correct password, and press the Enter key third. Note: Make sure the Password on boot is set to Enable if you need the password protection at power on. To set a User Password: 1 Turn on your computer. Press F2, while the initial screen is displayed. The BIOS Setup Utility screen opens. 2 Select Security, using the cursor directional keys. 3 Select Set User Password, and press the Enter key. The Set User Password window opens. 4 Choose your user password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field. 5 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 6 Commit your password to memory, and press the Enter key. 7 Press F10 to exit. 8 Select OK in the Setup Confirmation window. 40