Lenovo Yoga 2 13 Laptop Hardware Maintenance Manual - Lenovo Yoga 2 13 - Page 45

Fan assembly and heat sink assembly, Remove

Get Lenovo Yoga 2 13 Laptop PDF manuals and user guides View all Lenovo Yoga 2 13 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Lenovo Yoga 2 13 1050 Fan assembly and heat sink assembly For access, remove these FRUs in order: • "1010 Base cover" on page 33 • "1020 Battery pack" on page 35 • "1030 Hard disk drive" on page 36 • "1040 PCI Express Mini Card for wireless LAN and SSD card" on page 39 Figure 5. Removal steps of fan assembly and heat sink assembly Unplug the fan connector in the direction shown by arrow 1. Remove the screws 2. Lift the fan assembly and heat sink assembly in the direction shown by arrow 3. Be careful not to damage the connector. b b a b c Step Screw (quantity) 2 M2 × 3 mm, flat-head, nylok-coated (3) Thermal module to FAN Color Torque Black 1.5~2.0 kgf*cm When installing: Make sure that the connectors are attached firmly. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
41
Lenovo Yoga 2 13
1050 Fan assembly and heat sink assembly
For access, remove these FRUs in order:
•
“1010 Base cover” on page 33
•
“1020 Battery pack” on page 35
•
“1030 Hard disk drive” on page 36
•
“1040 PCI Express Mini Card for wireless LAN and SSD card” on page 39
Figure 5. Removal steps of fan assembly and heat sink assembly
Unplug the fan connector in the direction shown by arrow
1
. Remove the
screws
2
. Lift the fan assembly and heat sink assembly in the direction shown
by arrow
3
. Be careful not to damage the connector.
b
b
b
c
a
Step
Screw (quantity)
Color
Torque
2
M2 × 3 mm, flat-head, nylok-coated (3) Thermal
module to FAN
Black
1.5~2.0 kgf*cm
When installing:
Make sure that the connectors are attached firmly.