Lenovo Yoga 300-11IBY Laptop Hardware Maintenance Manual - Yoga 300-11IBY - Page 60
Antenna assembly and LCD cover, Peel off the adhesive tapes securing the antenna boards
View all Lenovo Yoga 300-11IBY Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Lenovo Yoga 300 Hardware Maintenance Manual 1130 Antenna assembly and LCD cover For access, remove these FRUs in order: • "1010 Base cover" on page 34 • "1020 Battery pack" on page 36 • "1030 Hard disk drive" on page 37 • "1040 PCI Express Mini Card for wireless LAN and SSD card" on page 40 • "1050 Fan assembly and heat sink assembly" on page 42 • "1060 System board" on page 44 • "1070 Speakers" on page 47 • "1080 LCD unit" on page 48 • "1090 Power assembly" on page 49 • "1100 LCD front cover" on page 50 • "1110 Mic board, LCD cover, and hinges" on page 52 • "1120 LCD module" on page 54 Figure 13. Removal steps of antenna assembly and LCD cover Peel off the adhesive tapes securing the antenna boards, release the cables from the cable guide, and then remove the antenna assembly in the direction shown by arrows 1. a a When installing: Route the antenna cables along the cable guides and secure the antenna boards with adhesive tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. 56