LevelOne ADE-8204 Manual - Page 10

(6) Connect Cat5/5e/6 cable: Plug two ends of cable to Transmitter and Receiver's RJ-45 port, the monitor connected to the Receiver should display now and the green LED above ADE-8002's RJ-45 port should be ON to reflect the DVI signal activation. For ADE-8002, you can manually adjust the EQ/FOCUS to have the best display quality. The displayed DVI resolution will also relate to the distance been extended, it will be better to test prior actual installation and should not exceed the suggested frequency and corresponding distance. Connection of Single-Port DVI-D Extender (7) Extends Audio Signal: There is no audio function on ADE-8201, so you need to use a pair of ADE-8011 to extend the audio and the cable using is 4-wire phone cable and two ends of the cable should be made by straight RJ-11 connector. ADE-8201 ADE-8011 ADE-8011 Extended Connection of DVI-D with Audio