LevelOne ANA-6101 Quick Install Guide - Page 1

Outdoor Antenna Installation Before installation, please ensure you have the required products and that the contents of each product are complete. 1 Dismount the dipole antenna from your indoor access point / router. + Surge protector 2 Attach the connector of the extension cable to your WiFi Device *Extension cable is not included 3 Related Products: ANC-4230 ANC-2210 ANC-2310 Connect the connector of the extension cable to surge arrestor. 4 Connect remaining surge arrestor connector to the low loss cable You have to know how to assemble the surge arrestor 1 Before installing the antenna, make sure the purchased extension cable can reach the location of your wireless devices. 2 Take out the L-type metal bracket and mark the mount position on the wall. 3 Screw it to the wall 1. Put on the washer 2. Screw on the nut 4 Seat the arrestor into bracket 5 Connect the remaining N connector to the Antenna Weather-proof tape for outdoor installations If your surge protector is installed outdoors, remember to wrap both connectors tightly with the enclosed water-proof tape after screwing on the cable connectors.