LevelOne BOH-1400 Quick Install Guide - Page 2
English
View all LevelOne BOH-1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
English Installing The Camera In The Housing 1 2 3 1. Fasten camera on mounting board with 1/4 screws. 2. Fasten camera mounting board to camera housing with 3x8 double washer screws. 3. After internal wiring is complete, close the housing and tighten the four screws. Installing The Bracket 1 2 3 1. Fix the bracket onto wall. 2. Through the rubber gasket, tighten up the bottom of the housing with the flat head 6x8 Hex socket cap screw. 3. Adjust camera angle and tighten up the bolt as shown in the figure. 1
1
English
Installing The Camera In The Housing
1
2
3
1.
Fasten camera on mounting board with 1/4 screws.
2.
Fasten camera mounting board to camera housing with 3x8 double washer screws.
3.
After internal wiring is complete, close the housing and tighten the four screws.
Installing The Bracket
1
2
3
1.
Fix the bracket onto wall.
2.
Through the rubber gasket, tighten up the bottom of the housing with the flat head 6x8 Hex
socket cap screw.
3.
Adjust camera angle and tighten up the bolt as shown in the figure.