LevelOne DVE-0500 Manual - Page 5
Installation
 |
View all LevelOne DVE-0500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Step 1: Connect each duplex LC fiber cable one by one as indicated number. The channel "1" of TX corresponds to channel 1 of RX. The other channels are the same connection. Step 2: Connect the AC/DC adapter to the RX module. Neglect AC/DC adapter to the TX module. The PC may supply voltage source via DVI receptacle. Step 3: Plug directly the TX module in the DVI receptacle of PC. Do NOT use any intermediate cable or adapter between them. Step 4: Plug the RX directly module in the DVI receptacle of display. Do NOT use any intermediate cable or adapter between them. Step 5: Power on the PC and display. 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
5
Installation
Step 1
: Connect each duplex LC fiber cable one by
one as indicated number. The channel “1” of TX
corresponds to channel 1 of RX. The other channels
are the same connection.
Step 2
: Connect the AC/DC adapter to the RX module.
Neglect AC/DC adapter to the TX module. The PC
may supply voltage source via DVI receptacle.
Step 3
: Plug directly the TX module in the DVI
receptacle of PC. Do
NOT
use any intermediate cable
or adapter between them.
Step 4
: Plug the RX directly module in the DVI
receptacle of display. Do
NOT
use any intermediate
cable or adapter between them.
Step 5
: Power on the PC and display.