LevelOne EAP-200 Datasheet - Page 2
Built-in Servers & Client Interfaces to Other Services - firmware
View all LevelOne EAP-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
www.level1.com I one world_one brand_one level_ Technical Specification Wireless Radio - Standard IEEE 802.11b/g 2.4GHz IEEE 802.11n 2.4GHz IEEE 802.3af Power over Ethernet - Frequency band: 2.4GHz - Wireless architecture: (1) AP mode (2) Repeater mode (WDS / Universal Repeater) - Modulation: (1) OFDM (64-QAM, 16-QAM, QPSK, BPSK) (2) DSSS (CCK, DBPSK, DQPSK) - Channels: (1) USA (Channel 1~11) (2) Japan (Channel 1~14) (3) Europe (Channel 1~13) - Data rate with auto fallback: (1) 802.11b: 1 ~ 11Mbps (2) 802.11g: 6 ~ 54Mbps (3) 802.11n: 6.5 ~ 300Mbps - Transmit Power: (1) 802.11b: up to 18 dBm (2) 802.11g: up to 16 dBm (3) 802.11n: up to 16 dBm - Receiver Sensitivity: (1) 802.11b: 11Mbps@-84 dBm (2) 802.11g: 54Mbps@-69 dBm (3) 802.11n: 300Mbps@-65 dBm Antenna 2x 5dBi Detachable with SMA connectors QoS-WMM - DiffServ/TOS - IEEE 802.1p/COS - IEEE 802.1Q Tag VLAN priority control - IEEE 802.11e WMM Handover & Roaming - IEEE 802.11f IAPP - IEEE 802.11i pre-auth (PMKSA cache) Security - WEP (64/128/152 bits) - EAP-TLS + Dynamic WEP - EAP-TTLS + Dynamic WEP - PEAP/MS-PEAP + Dynamic WEP - WPA (PSK + TKIP) - WPA (802.1X certification + TKIP) - 802.11i WPA2 (PSK + CCMP/AES) - 802.11i WPA2 (802.1X certification + CCMP/AES) - Setting for TKIP/CCMP/AES key's refreshing period - Hidden ESSID support - Layer 2 wireless isolation - Wireless Layer 2 Firewall - MAC Address filtering (MAC ACL) - MAC authentication with RADIUS servers - Maximum number of registered RADIUS servers Access Point 3 System Management - Web-based administration - SNMP v1/v2c - Provides Event Log - SYSLOG information support - Configuration backup and restore - Restore to factory default setting via Web or Console - Firmware upgrade - WES (Press-and-Connect) button for WDS Easy Setup - Supports Tunneled AP Management with LevelOne Secure WLAN Controllers Built-in Servers & Client Interfaces to Other Services - DHCP client - DNS client - SYSLOG client - RADIUS client - SNMP v1/v2c client Wireless Signal Management - Number of ESSIDs (Virtual APs): 8 - Number of associated clients per system: 128 - Setting for maximum number of associated clients Hardware Specifications - IP50 Dust-proof metal case - LAN Port: 2 × 10/100 Base-T Ethernet with PoE - Console Port: 1 x DB9 - USB Port: 1 - Screw Terminal Block: 1 - LED Indicators: 1 × Power, 2 × LAN, 1 × WLAN, 1 × WDS, 1 × WES, 1 × USB Physical and Power - Power adapter (included) 1. AC Input: 100~240 VAC, 50~60Hz 2. DC Output: 12V, 1.5A - Alternative Power: 1. 802.3af PoE (PSE not included) 2. 12~48V DC power input - Form factor: Wall Mountable - Dimensions (W x D x H): 8.0" x 5.3" x 1.4" (204 mm x 134 mm x 35 mm) - Weight: 1.3 lbs (0.61 kg) Environment - Operation Temperature: -30°C ~ 70°C - Storage Temperature: -40°C ~ 85°C - Operation Humidity: 10% ~ 80% (Non-condensing) - Storage Humidity: 5% ~ 90% (Non-condensing) Certifications - FCC, CE - RoHS compliant