LevelOne FCS-0071 Manual - Page 10
Network Configuration
View all LevelOne FCS-0071 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
FCS-0071 User's Manual 3. Network Configuration IP Installer is a utility that provides an easier, more efficient way to configure the IP address and network settings of the devices. It even provides a convenient way to set the network settings for multiple devices simultaneously using the batch setting function. Moreover, IP Installer can save the network settings for all devices as a backup and restore them when necessary. Preparation before IP Assignment 1. Always consult your network administrator before assigning an IP address to your server in order to avoid using a previously assigned IP address. 2. Ensure the camera is powered on and correctly connected to the network. 3. MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of the device as the serial number (S/N) with 12 digits (e.g. 00116B-XXXXXX). 4. Although the IP Installer is able to find and configure any FCS-0071 on the LAN except those that are behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the Web-based user interface of the camera, the host PC must be in the same subnet. For more information about subnets, please consult your network administrator. Using IP Installer to Assign an IP Address to FCS-0071 1. Once IP Installer has been successfully installed on the PC, double click to run the software. 9 2. Click the [Device Search] to search the device in the LAN. 3. From the list, select the device with the MAC Address that corresponds to the FCS-0071 that is to be configured. The MAC Address is identical to the unit's S/N (Serial Number). 9