LevelOne FCS-1101 Quick Install Guide - Page 9
Using the Software CD to con the camera, Installing IP CamSecure - default password
View all LevelOne FCS-1101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Using the Software CD to configure the camera Power on your PC and insert the CD-ROM The setup page should load automatically. If it does not, please select your CD-ROM drive manually to open the setup page. Click "Install Software" (Figure 1-1) Select "IP CamLocator" to initiate the installation.(Fifure2-1) Click "Yes" and choose which language UI you'd like to install. "Next" -> "Next" to start the installation.(Figure 2-2) If you wish to install the software program in an alternate location, click "Browse", otherwise click "Next" to move on to the next step. (Figure 2-3) Click "Next" -> "Next"->"Install" to install the software.(Figure 2-4) Click "Finish" to complete the software installation.(Figure 2-5) Run "IP CamLocator".The IP CamLocator will show MAC address and an IP Address of available LevelOne Network Cameras. Highlight the MAC address and click on "Link to IE".(Figure 2-6) The default user name of network camera is "root" and password is the MAC address (in capital letters). The following screen would appear automatically after successful login. Click "Install" and proceed. LevelOne Network Cameras should be active by now. (Figure 2-7) Congratulations, you can use the camera through the network to view the video.(Figure 2-8) Installing IP CamSecure Click "IP CamSecure" and follow the onscreen instruction or refer to the user's manual to complete installation.(Figure 3-1)